Buying guide · Drivers

Getting fit for a driver: what to bring and what to ask

By FIG Golf · Updated November 2026

Heads up: some links in this guide are affiliate links. If you buy through one, FIG Golf may earn a commission at no extra cost to you. It never decides what we recommend. Read our disclosure.

A new driver is a $600–$900 decision. A fitting is how you make sure the loft, shaft and head actually match your swing, instead of matching the ad you saw last week.

Why a fitting matters more than the model

Every 2026 flagship driver, from the TaylorMade Qi4D to the Callaway Quantum Max and Titleist GTS2, ships with an adjustable hosel, movable weights, and a long list of stock shafts. Two golfers can buy the same head and get very different results because of the loft and shaft they end up with. The scorecard doesn't have pictures, and it doesn't care what the sole says either.

A fitting tests those options against your swing on a launch monitor, so you buy the setup that gives you the most distance you can find in the fairway.

What to bring

The launch monitor numbers to watch

NumberWhat it tells youWhat you want
Ball speedHow fast the ball leaves the face. The biggest driver of distance.Higher, and consistent from swing to swing.
Smash factorBall speed divided by club speed. Shows how centered your contact is.Close to 1.50 on good strikes.
Launch angleHow high the ball starts.For most amateurs, somewhere in the low-to-mid teens.
Spin rateBackspin in rpm. Too much balloons; too little falls out of the sky.Roughly 2,000–2,800 rpm for most swing speeds.
DispersionHow wide your shots spread left to right.The tightest group, even if it gives up a few yards.

Ask the fitter to show you averages over several swings, not your one best shot. The setup that wins on average is the one you'll take to the course.

Questions to ask your fitter

  1. What changed my numbers the most: the head, the loft, or the shaft?
  2. How does this setup compare to my current driver on average ball speed and dispersion?
  3. Which hosel setting and weight position did we land on, and can you write them down?
  4. Is the shaft that worked a stock option or an upcharge?
  5. Would a different head in the same family (Max, LS, or draw) fit my miss better?

After the fitting

Write down the head, loft, hosel setting, shaft model, flex and length. Those specs are what you're buying. You can order through the fitter or compare prices online with the exact same build.

Starting point: our 2026 driver picks cover who the Qi4D, Quantum Max and GTS2 suit, so you know which heads to put in your fitting session.

Keep reading

Sources: Golfalot 2026 drivers · Today's Golfer driver test